Protective effect of N-(E)-p-coumaroyltyrosine on LPS-induced acute inflammatory injury and signaling pathway analysis.

N-trans-p-coumaroyltyrosine (N-(E)-p-coumaroyltyrosine, NPCT), extracted and purified from Abri Mollis Herba, is an amino acid amide. The defense mechanism of NPCT against inflammatory response is still unknown. In this study, lipopolysaccharide (LPS)-induced zebrafish acute inflammatory injury model was established to observe the inhibitory effect of NPCT on the aggregation of inflammatory cells in the yolk sac of zebrafish, as well as the inhibitory effect of NPCT on inflammatory and gas signaling factors. Results show that NPCT could inhibit inflammatory cell infiltration in zebrafish yolk sac, the migration and aggregation of macrophages and neutrophils to the site of inflammation, and the release of Nitric Oxide (NO) and Reactive Oxygen Species (ROS) in zebrafish, indicating that NPCT could substantially significantly prevent the development of LPS-induced acute systemic inflammation. In addition, the analysis results of RNA-seq showed that in the model group versus the administered group, the differentially expressed genes were mainly enriched to inflammatory signaling pathways, such as the NOD-like receptor signaling pathway and Toll-like receptor signaling pathway, which were down-regulated in the administered group. The TLR4, MyD88, IRAK4, NF-κB, IκB, NLRP3, Caspase-1, ASC, IL-1ß, and IL-6 genes were significantly different in the transcripts, and the overall trend of the qPCR results was consistent with the transcriptome sequencing results. Therefore, NPCT had a significant inhibitory effect on LPS-induced acute inflammatory injury in zebrafish, and its anti-inflammatory mechanism may be through the regulation of key genes on the NOD-like receptor signaling pathway and Toll-like receptor signaling pathway, thereby affecting the release of relevant inflammatory cytokines.

Stress-Stabilized Crystalline Phases of Ultrahigh Molecular Weight Polyethylene under Tensile Stress.

Ultrahigh molecular weight polyethylene (UHMWPE) is a semicrystalline polymer renowned for its exceptional mechanical properties, making it a popular material in various high-tech fields. Its mechanical attributes are predominantly governed by its crystalline structures, which may experience alterations in the chain conformation and interchain packing during mechanical deformation. This phenomenon leads to the emergence of distinct polymorphs with unique lattice structures. The investigation of stress-stabilized crystal structures of UHMWPE under tensile stress currently poses challenges with certain aspects remaining unclear. To address this, in this study, time-resolved X-ray wide-angle scattering (TR-WAXS) experiments of biaxially stretched UHMWPE films under in situ tensile conditions were conducted. Experimental results revealed two distinct stress-stabilized crystal phases of UHMWPE that differed from those previously reported. These stress-stabilized phases have been identified as the stress-stabilized orthorhombic crystal phase and the stress-stabilized monoclinic crystal phase, and their corresponding lattice parameters have been accurately calculated through an ab initio computational method. These findings provide deeper insights into UHMWPE's behavior under mechanical strain, opening other avenues for further academic exploration and potential applications in cutting-edge fields.

Fabrication of Anatase TiO2/PVDF Composite Membrane for Oil-in-Water Emulsion Separation and Dye Photocatalytic Degradation.

At present, the types of pollutants in wastewater are more and more complicated, however, the multifunctional membrane materials are in short supply. To prepare a membrane with both high efficient oil-in-water emulsion separation performance and photocatalytic degradation performance of organic dyes, the bifunctional separation membrane was successfully prepared by electrostatic spinning technology of PVDF/PEMA and in situ deposition of anatase TiO2 nanoparticles containing Ti3+ and oxygen vacancies (Ov). The prepared composite membrane has excellent hydrophilic properties (WCA = 15.65), underwater oleophobic properties (UOCA = 156.69), and photocatalytic performance. These composite membranes have high separation efficiency and outstanding anti-fouling performance, the oil removal efficiency reaches 98.95%, and the flux recovery rate (FRR) reaches 99.19% for soybean oil-in-water emulsion. In addition, the composite membrane has outstanding photocatalytic degradation performance, with 97% and 90.2% degradation of RhB and AG-25 under UV conditions, respectively. Several oil-in-water separation and dye degradation experiments show that the PVDF composite membrane has excellent reuse performance. Based on these results, this study opens new avenues for the preparation of multifunctional reusable membranes for the water treatment field.

Fabrication of photo-Fenton self-cleaning PVDF composite membrane for highly efficient oil-in-water emulsion separation.

The anti-fouling performance of membranes is an important performance in the separation of oil/water. However, the membrane with anti-fouling performance will also have surface scaling phenomenon when it runs for a long time. Therefore, there is still a great demand for stain-resistant membranes with good self-cleaning ability and high flux recovery rate. Based on this, this paper firstly prepared a hydrophilic membrane with carboxyl group and carboxyl ion by blending poly(ethylene-alt-maleic anhydride) (PEMA) and polyvinylidene fluoride (PVDF), and then prepared a self-cleaning composite membrane by in situ mineralization of ß-FeOOH particles on the surface of the membrane for efficient oil-in-water emulsion separation. A large number of -COOH/COO- and ß-FeOOH particles on the membrane surface make the composite membrane have strong hydrophilic properties (WCA = 20.34°) and underwater superoleophobicity (UOCA = 155.10°). These composite membranes have high separation efficiency (98.8%) and high flux (694.56 L m-2 h-1 bar-1) for soybean oil-in-water emulsion. Importantly, the as-prepared membrane shows excellent flux recovery rate (over 99.93%) attributed to the robust photo-Fenton catalytic activity of ß-FeOOH, and the ß-FeOOH is chemically bonded to the as-prepared membrane, which makes the as-prepared membrane have good reusability. This work provides hope for the application of self-cleaning membranes in the construction of anti-fouling membranes for wastewater remediation.

Discussion of Orientation and Performance of Crosslinked Ultrahigh-Molecular-Weight Polyethylene Used for Artificial Joints.

Previously, the orientation structure of ultrahigh-molecular-weight polyethylene (UHMWPE) for artificial joints was considered to be unchanged after irradiation crosslinking. Therefore, much of the research related to the long-term failure of artificial joints has focused on material improvements. In this study, ultrasmall-angle X-ray scattering (USAXS) and the small/wide-angle X-ray scattering (SAXS-WAXS) combined technique reveal that the orientation structures of UHMWPE materials at all scales (nanoscale to microscale) are responsible for the long-term failure of artificial joints. To further illustrate the formation of these hierarchical oriented structures, a simple model is presented. In this model, first, the migration of free radicals plays a vital role, and the different steric hindrances in different directions directly lead to uneven migration behavior of free radicals. Second, the uneven migration of free radicals contributes to an inhomogeneous concentration of free radicals, thus resulting in observable crosslinking nonuniformities. Finally, all the hierarchical structural nonuniformities promote long-term failure of artificial joints after long-term wear.

Fabrication of a biconnected structure PVB porous heddle via thermally induced phase separation.

Herein, a porous heddle of poly(vinyl butyral) (PVB) was successfully prepared by thermally induced phase separation with PEG400. A phase diagram of PVB was presented, and the effects of various parameters, such as polymer concentration, extrusion temperature, quenching temperature and take-up speed, on the morphology and properties of the PVB porous heddle were investigated. The pore size and porosity of the heddle increase as the extrusion temperature increases. Furthermore, upon increasing the quenching temperature during the TIPS process, the pore size and mechanical properties decrease, whereas porosity increases. In addition, due to the substantially unchanged crystallinity of the PVB heddle, the tensile strength increases since porosity decreases with the increasing take-up speed. The porosity of the prepared PVB porous heddle reached up to 74.63% when the PVB concentration, the quenching temperature and the extrusion temperature were 20 wt%, 0 °C and 170 °C, respectively. Thus, this porous heddle exhibiting a biconnected structure and significant mechanical properties is promising in the field of porous carrier materials.

PVA and CS cross-linking combined with in situ chimeric SiO2 nanoparticle adhesion to enhance the hydrophilicity and antibacterial properties of PTFE flat membranes.

Herein, a new hydrophilic and antibacterial polytetrafluoroethylene (PTFE) flat MF membrane was fabricated via a low-cost and simple preparation method in which chitosan (CS) was crosslinked with poly(vinyl alcohol) (PVA) using epichlorohydrin (ECH) as a cross-linker followed by in situ chimeric SiO2 nanoparticle adhesion. The surface of the modified membrane had decreased C and F contents, and a large number of hydrophilic groups appeared. The treated membrane had good hydrophilicity and antibacterial properties. Moreover, the PTFE-modified membrane had high separation efficiency and antifouling property for oil-in-water emulsions. Finally, the hydrophilic stability of the PTFE membrane was studied by subjecting it to continuous water rinsing and soaking in solutions of different pH values. The present study demonstrates that this modified membrane has potential practical applications in industrial wastewater recovery.

Formation and characterization of polytetrafluoroethylene nanofiber membranes for high-efficiency fine particulate filtration.

Polytetrafluoroethylene (PTFE) porous membranes are widely used for high-temperature filtration. The polytetrafluoroethylene nanofiber membranes for fine particulate filtration were prepared by sintering the precursor electrospun polytetrafluoroethylene/polyvinyl/boric acid alcohol composite membranes. The effects of PTFE/PVA mass ratio and sintering temperature on the morphology and properties of the prepared membranes were investigated to obtain the PTFE nanofibers with different diameters, and the film has been characterized by SEM, TG, XRD, FT-IR, and EDS, and the mechanical and hydrophobic properties of the membranes were also investigated. The PTFE nanofiber membranes after sintering had nanofiber and nanowire structures. Moreover, the membranes were tested in air filtration. The filtration efficiency and pressure drop were tested to evaluate the membrane permeability and separation properties. The results showed a high filtration efficiency (98%) and a low pressure drop (90 Pa) for 300 nm sodium chloride aerosol particles at a 30 L min-1 airflow velocity and the hydrophobic membranes showed durable self-cleaning properties, which suggested that the PTFE nanofiber membranes were a promising candidate for high temperature filtration applications.

Lumbar laminotomy and replantation for the treatment of adult spinal epidermoid cyst: A case report.

RATIONALE: Adult spinal epidermoid cyst (SEC) is a rare tumor. Lumbar laminectomy and tumor removal was a routine surgical procedure for adult spinal epidermoid cyst according to the literature, but postoperative lumbar instability and intractable low back pain may occur. In this study, we presented a brief report of an adult lumbar epidermoid cyst and introduced another surgical approach. PATIENT CONCERNS: This 28-year-old woman has been complaining of the severe right buttock pain and right thigh radiating pain for half a year. She had been diagnosed as sacroiliitis, spinal arthritis, and lumbar disc herniation at 3 different hospitals before coming to our hospital. And she received a variety of conservative treatments, including non-steroidal anti-inflammatory drugs, aspirin, acetaminophen, glucocorticoids, acupuncture, physical therapy, and so on. However, her pain did not diminish at all. Finally, we find a space-occupying lesion in her lumbar magnetic resonance images (MRI). The lesion was slightly low, equal, and uneven equal-low signals on T1WI. T2WI showed slightly higher, equal, and uneven equal-high signals. And a thin-rim enhancement was observed on Gd-DTPA-enhanced MRI. DIAGNOSES: Adult spinal epidermoid cyst. INTERVENTIONS: The patient underwent a surgery of lumbar laminectomy, tumor excision, and spinous process-vertebral plate in situ replantation. OUTCOMES: Postoperative pathology prompted that the tumor was cystoid. The patient's symptoms were completely removed 1 week after surgery. Three-month postoperative MRI confirmed that the spinal epidermoid cyst had been completely removed and three-dimensional CT prompted lumbar lamina in situ. Bony fusion occurred at 6 months after the surgery. LESSONS: Lumbar laminotomy and replantation provides an ideal option to treat adult spinal epidermoid cyst because it can completely remove the cyst and simultaneously reduce the risk of iatrogenic lumbar instability.

Preparation and properties of PTFE hollow fiber membranes for the removal of ultrafine particles in PM2.5 with repetitive usage capability.

This study reveals the first attempt to apply PTFE hollow fiber membranes for removing ultrafine particles in PM2.5. The asymmetric polytetrafluoroethylene (PTFE) hydrophobic hollow fiber membranes were prepared through a cold pressing method including paste extrusion, stretching and heating. The reduction ratio, stretching ratio and heating temperature have influences on the morphology, structure, porosity, shrinkage ratio, tensile strength and permeability of the PTFE hollow fiber membranes. The morphological properties of the PTFE hollow fiber membrane were studied using field emission scanning electron microscopy (FESEM). The increase of stretching ratio can improve the pore size and porosity of the hollow membrane, but be negative for the mechanical properties. By changing the reduction ratio we can obtain different inner diameter PTFE hollow fiber membranes. Finally, the PTFE hollow fiber membranes were tested for their performances in the removal of ultrafine particles in PM2.5. The PTFE hollow fiber membranes had the microstructure of nodes interconnected by fibrils, designed to possess the synergistic advantages of porous filters and fibrous filters with a sieve-like outer surface and a fibrous-like porous substrate. Under dead-end filtration, the filtration efficiency is related to the wall thickness, pore size and porosity of the membranes. The air filtration achieved was higher than 99.99% for PM2.5 and 90% for PM0.3, indicating that all the prepared PTFE hollow fiber membranes exhibited satisfactory removal of ultrafine particles performances. Because of the hydrophobicity, PTFE hollow fiber membranes have self-cleaning ability and a large dust-holding capacity of >120 g m-2, slowing down membrane fouling. The fouled filter media after washing retained a high filtration efficiency without obvious deterioration. The hydrophobic PTFE hollow fiber membranes developed in this work exhibited potential applications in air filtration.

Effects of ginsenoside Rg1-loaded alginate-chitosan microspheres on human bone marrow stromal cells.

The ginsenoside Rg1 is the most abundant compound in ginseng. Recent studies showed that Rg1 had neuroprotective effects on neuronal cells. The present study was to prepare Rg1-loaded alginate-chitosan microspheres and research the effects of microspheres on human bone marrow (BM) stromal cells (hBMSC). The alginate-chitosan microspheres were prepared by mechanical emulsification technique in combination with ion (Ca2+) and chitosan solidification. Subsequently, the microspheres were employed to load Rg1 ginseng extracts. The microspheres had a smooth surface and were spherical in shape. The average diameter of the microspheres was 3.95 µm. The loading efficiency was approximately 2.12%. The purity of isolated hBMSC was over 98.8%. Rg1-loaded microspheres could promote hBMSC proliferation and differentiation. Meanwhile, Rg1-loaded microspheres could also suppress hBMSC apoptosis induced by hypoxia-reoxygenation. In conclusion, these loaded microspheres may be used in the research of neuroprotective effects of Rg1.

Rapidly Simultaneous Determination of Six Effective Components in Cistanche tubulosa by Near Infrared Spectroscopy.

Quantitative determination of multiple effective components in a given plant usually requires a very large amount of authentic natural products. In this study, we proposed a rapid and non-destructive method for the simultaneous determination of echinacoside, verbascoside, mannitol, sucrose, glucose and fructose in Cistanche tubulosa by near infrared spectroscopy (NIRS). Near infrared diffuse reflectance spectroscopy (DRS) and high performance liquid chromatography (HPLC) were conducted on 116 batches of C. tubulosa samples. The DRS data were processed using standard normal variety (SNV) and multiplicative scatter correction (MSC) methods. Partial least squares regression (PLSR) was utilized to build calibration models for components-of-interest in C. tubulosa. All models were then assessed by calculating the root mean square error of calibration (RMSEC), correlation coefficient of calibration (r). The r values of all six calibration models were determined to be greater than 0.94, suggesting each model is reliable. Therefore, the quantitative NIR models reported in this study can be qualified to accurately quantify the contents of six medicinal components in C. tubulosa.

Use of a 10.22 m diameter EPB shield: a case study in Beijing subway construction.

INTRODUCTION: Beijing subway line 14 includes four stations and approximately 2.8 km of tunnels between the Dongfengbeiqiao and Jingshunlu areas of the city. Due to the surface and underground space limitations of this section, a double-track running tunnel instead of two single-track running tunnels was adopted to connect the two stations. The double-track tunnels were excavated by a 10.22 m diameter earth pressure balance (EPB) shield. It was the first time that an EPB shield more than 10 m in diameter was used in Beijing subway construction. CASE DESCRIPTION: The shield, which passes underneath densely built-up areas of the city and is equipped with a spoke-type cutterhead, with balance between the ground pressure and the earth chamber pressure at the tunnel face, is of great importance. Referring to experiences gained in the EPB shield tunneling, attention was paid to the function of soil conditioning and simultaneous backfilling grouting of the shield, and some special designs were considered in manufacturing the machine. DISCUSSION AND EVALUATION: In addition to the agitating rods welded to the cutterhead, two independently driven agitators were added to fully mix everything in the earth chamber. Independent pipelines were arranged for injecting different conditioning agents. Indoor tests in combination with field tests were conducted to find suitable additives and injection ratios of the additives, and determine the mix ratio of the two-component grout for simultaneous backfilling grouting. A scheme was employed for simultaneously injecting the bentonite slurry at 8% concentration and the foam liquid at 5% concentration to condition the excavated soil. The cement-sodium silicate grout was adopted to fill the tail void and the injection volume per ring was 14.1-15.3 m3. CONCLUSIONS: The performance of the shield and evaluation of the corresponding tunneling technologies are introduced in terms of the shield tunneling induced ground surface settlements. The success of the project is of great significance to Beijing subway construction and underground space utilization. The findings serve as a useful reference for similar projects.

Transcriptomic analysis reveals distinct resistant response by physcion and chrysophanol against cucumber powdery mildew.

Physcion and chrysophanol induce defense responses against powdery mildew in cucumbers. The combination of these two compounds has synergistic interaction against the disease. We performed RNA-seq on cucumber leaf samples treated with physcion and chrysophanol alone and with their combination. We generated 17.6 Gb of high-quality sequencing data (∼2 Gb per sample) and catalogued the expressions profiles of 12,293 annotated cucumber genes in each sample. We identified numerous differentially expressed genes that exhibited distinct expression patterns among the three treatments. The gene expression patterns of the Chr and Phy treatments were more similar to each other than to the Phy × Chr treatment. The Phy × Chr treatment induced the highest number of differentially expressed genes. This dramatic transcriptional change after Phy × Chr treatment leaves reflects that physcion combined with chrysophanol treatment was most closely associated with induction of disease resistance. The analysis showed that the combination treatment caused expression changes of numerous defense-related genes. These genes have known or potential roles in structural, chemical and signaling defense responses and were enriched in functional gene categories potentially responsible for cucumber resistance. These results clearly demonstrated that disease resistance in cucumber leaves was significantly influenced by the combined physcion and chrysophanol treatment. Thus, physcion and chrysophanol are appealing candidates for further investigation of the gene expression and associated regulatory mechanisms related to the defense response.

[Effects of Pb Stress on Photosynthetic Pigment Biosynthesis and Growth of Rabdosia rubescens].

OBJECTIVE: To study the impacts of lead (Pb) stress on the leaf photosynthetic pigment and the growth of Rabdosia rubescens,in order to provide a basis for planting area selection and growth regulation. METHODS: Taking chlorophyll a, chlorophyll b, carotenoids, growth rate, biomass and Pb content as the indexes, the Ramets hydroponic experiments at Pb concentration levels (135,270 and 540 mg/L) in the time(20, 35 and 50 d) were carried out. Photosynthetic pigment content was determined by spectrophotometer, and Pb mass fraction was detected with plasma emission spectrometer. RESULTS: There was uncertain effect on chlorophyll and carotenoid synthesis in different Pb concentrations in-early period (20 and 35 d). At the time of 50 d, the chlorophyll content was higher in the low-mid Pb concentrations, significantly lower in the high Pb concentration compared with the control group, and there were no significant differences on carotenoid contents in different Pb concentrations. CONCLUSION: Low-mid Pb concentrations can promote chlorophyll synthesis, and the bioaccumulation of high Pb concentration can inhibit the chlorophyll synthesis, and then restrict the growth of Rabdosia rubescens.

Dynamic transcriptional profiling provides insights into tuberous root development in Rehmannia glutinosa.

Rehmannia glutinosa, an herb of the Scrophulariaceae family, is widely cultivated in the Northern part of China. The tuberous root has well-known medicinal properties; however, yield and quality are threatened by abiotic and biotic stresses. Understanding the molecular process of tuberous root development may help identify novel targets for its control. In the present study, we used Illumina sequencing and de novo assembly strategies to obtain a reference transcriptome that is relevant to tuberous root development. We then conducted RNA-seq quantification analysis to determine gene expression profiles of the adventitious root (AR), thickening adventitious root (TAR), and the developing tuberous root (DTR). Expression profiling identified a total of 6794 differentially expressed unigenes during root development. Bioinformatics analysis and gene expression profiling revealed changes in phenylpropanoid biosynthesis, starch and sucrose metabolism, and plant hormone biosynthesis during root development. Moreover, we identified and allocated putative functions to the genes involved in tuberous root development, including genes related to major carbohydrate metabolism, hormone metabolism, and transcription regulation. The present study provides the initial description of gene expression profiles of AR, TAR, and DTR, which facilitates identification of genes of interest. Moreover, our work provides insights into the molecular mechanisms underlying tuberous root development and may assist in the design and development of improved breeding schemes for different R. glutinosa varieties through genetic manipulation.

Mitochondrial fragmentation is an important cellular event induced by ruthenium(II) polypyridyl complexes in osteosarcoma cells.

A series of ruthenium(II) polypyridyl complexes were synthesized and evaluated for their in vitro anticancer activities. The results showed that ruthenium polypyridyl complexes, especially [Ru(bpy)2 (p-tFPIP)](2+) (2 a; bpy=bipyridine, tFPIP=2-(2-trifluoromethane phenyl)imidazole[4,5-f][1,10]phenanthroline), exhibited novel anticancer activity against human cancer cell lines, but with less toxicity to a human normal cell line. The results of flow cytometry and caspase activities analysis indicated that the 2 a-induced growth inhibition against MG-63 osteosarcoma cells was mainly caused by mitochondria-mediated apoptosis. DNA fragmentation and nuclear condensation as detected by TUNEL-DAPI co-staining further confirmed 2 a-induced apoptotic cell death. Further, fluorescence imaging revealed that ruthenium(II) polypyridyl complexes could target mitochondria to induce mitochondrial fragmentation, accompanied by depletion of mitochondrial membrane potential. Taken together, these findings suggest a potential application of theses ruthenium(II) complexes in the treatment of cancers.

Amelioration of dextran sulphate sodium-induced colitis in mice by echinacoside-enriched extract of Cistanche tubulosa.

Echinacoside (ECH) is a major bioactive phenyethanoids in medicinal herba Cistanche and has been reported to have antiinflammatory activity and beneficial effect on wound healing in many experimental studies. This study was to test the efficacy of ECH-enriched extract of Cistanche tubulosa in the treatment of dextran sulphate sodium (DSS)-induced colitis, a preclinical model of ulcerative colitis. Oral administration of ECH extract significantly suppresses the development of acute colitis, indicated by lowering disease activity index (p < 0.0001, n = 8) and preventing colonic damage (p = 0.0336). Histological examinations showed that ECH extract treatment protected intestinal epithelium from inflammatory injury (p = 0.0249) but had less effect on inflammatory cellular infiltration (p = 0.1753). The beneficial effect of ECH extract treatment was associated with upregulation of transforming growth factor (TGF)-ß1 as well as with an increase in the number of Ki67(+) proliferating cells in diseased colons (p < 0.0001). In cultured MODE-K cells, the addition of ECH extract enhanced in vitro wound healing that depended on TGF-ß1 expression. These data suggest that ECH extract possesses a greater efficacy in preventing DSS-induced colitis in mice, implying the potential of ECH or its derivatives for clinically treating inflammatory bowel disease.

[Effects of Pb2+ stress on seed germination & seedling growth of Rabdosia rubescens].

The seeds of Rabdosia rubescens were as the materials to research the impacts of different lead (Pb2+) concentrations(0, 135, 270, 540, 1 080 mg x L(-1)) on seed germination and seedling growth. The results show that: Low concentration of lead had no obvious effect on early germination of the seed, the germination vigor and germination speed were lightly higher but not significantly differed at the level of Pb concentration 135 mg x L(-1) with control group; Mid-high concentration of Pb solution (270-1 080 mg x L(-1)) significantly inhibited the seed germination and seedling growth, which reduced the seed germination rate, germination vigor, germination index, embryo root length and shoot length, growth index with increasing of Pb concentrations. There was a inhibitory effect on embryo shoot length and root length at mid-high lead concentrations stress, and stronger inhibitory effect on root , which was more sensitive than shoot to Pb stress(P < 0.05). Pb bioaccumulation coefficient (BC) was 0.76-2.59, increased with concentration of Pb; Pb enrichment in seedling mainly caused the growth inhibition. The fitting model predictive analyses show, the critical concentration of Pb, which causes the germination rate and biomass fresh weight reducing 10%, is 195.18, 101.65 mg x L(-1).

[Dynamic analysis of mineral elements during growth and development stage of the Kirilowii plant].

ICP-AES technology was used to determine the major mineral elements content and analyze the dynamic and cumulative amount of the main absorption during the growth and development stage of the Kinlowii organs plant. The result showed as follows: (1)The mineral elements were changing in the different stage. The highest mineral element accumulation of K, P, Ca, Mg, Fe, Mn, Zn, Cu and Mo occured in October, their values are 3,695.90, 445.88, 9,649.32, 2,652.10 mg per plant, 324,398.29, 40,188.65, 22,383.13, 36,054.58 and 61.95 microg per plant separately. But the highest value of B occured in September and the value was 8 690.97 microg per plant. (2) the distribution of mineral element in the kirilowii plant was not even, the contents of K and P were highest in kirilowii peel, they can reach 27.65 and 2.63 mg.g-1. The contents of Ca and Mg were highest in kirilowii leaves, they can reach 33.28 and 5.73 mg .g-1. The contents of Fe, Mn, B were highest in kirilowii roots, they can reach: 4,069.74, 127.73, 24.75 microg.g-1. The contents of Zn and Mo were highest in kirilowii seeds, they can reach 68. 61 and 1.07 microg.g-1. (3) the cumulation dynamic of mineral elements in kirilowii plant during the whole stages was S-type, and the plant showed rapid growth from the mid-July to mid-Spetember. The information of this study will supply a scientific data for the quality assessment and rational fertilization of kirilowii plant and harvestment.